TECHNICAL PUBLICATIONS (Journal) 2011-2012

[1]  M.M. Tariq, Z. Mehmood, M. Mansoor, M.N Ahmed and M. Pasha, "Development of parametric model and warping analysis of composite beam with multiple rigid regions, Advanced Materials Research, Volume 326, September 2011.

[2]  T. I. Khan and M. Jahanzaib, “Modelling and Flow Behavior Analysis of Inner Plenum using Computational Fluid Dynamics (CFD)”, European Journal of Scientific Research Vol.56 No.3, pp.346-353, July 2011.

[3]  M. U. Khan, I. Jan, J. Dai and N. Iqbal, “Uncalibrated Visual Servoing: an LMI approach”, Industrial Robot: An International Journal, Vol. 38, no. 2, pp. 130-138, 2011.

[4]  Masud, J. “Flow Field and Performance Analysis of an Integrated Diverterless Supersonic Inlet” The Aeronautical Journal, Vol. 115, No. 1170, pp. 471-480 (2011).

[5]  M. A. Malik with S. Adnan Qasim, M. Ali Khan and Riaz A. Mufti, “Low Viscoity Shear Heating in piston Skirt EHL in the Low Engine Start Up Speeds,” Tribology International, Volume 44, Issue 10, September, 2011. Pages 1134-1143

[6] M. A. Malik with S. A. Qasim and U. Farooq, “Analyzing viscoelastic effects in piston skirts EHL at small radial clearances in initial engine start up,” Tribology International, Volume 45, Issue 1, January, 2012. Pages 16-29

[7]  M. A. Malik with S. Adnan Qasim, M. Ali Khan and Riaz A. Mufti, “Modeling Shear Heating in Piston Skirts EHL Considering Different Viscosity Oils in Initial Engine Start-Up,” Journal of Engineering for Gas, Turbines and Power, Volume 134, Issue 3, March, 2012.

[8] M. T. Shah and R. Tabassum, “A Solution of 2-D Diffusion Convection Equation Using ADI Scheme for A Liquid Propellant Rocket Engine”, Arabian Journal of Mathematics, Manuscript Number: AJOM-D-12-00058

[9] S. Siddiq, S. Khushnood, Z. U. Koreshi, M. T. Shah and A. H. Qureshi, “Optimal Energy Recovery from Ammonia Synthesis in a Solar Thermal Power Plant”, Arabian Journal of Science and Engineering (AJSE) (Impact Factor=0.224), (accepted Dec. 2011)

[10] Sadaf Siddiq, S. Khushnood, Z. U. Koreshi and M. T. Shah, Solar “Thermal Energy Storage using Liquid Ammonia Systems in Industry”, NUST Journal of Engineering Sciences (NJES), Vol. 3. (accepted July 2011)

[11] Sadaf Siddiq, S. Khushnood, Z. U. Koreshi, M. T. Shah and A. H. Qureshi, “Process simulation of ammonia synthesis for increasing heat recovery in a base-load solar thermal plant:” A review, Taxila Engineering Journal (accepted January 2012)

[12] Sadaf Siddiq, S. Khushnood, Z. U. Koreshi, M. T. Shah and A. H. Qureshi, Baseload Solar Thermal Power Plant: Optimal operation with Ammonia as a Thermo-chemical Storage Medium, Journal of Energy Education Science and Technology. (Impact Factor=9.3), (submitted Aug. 2011)

[13]  T. M. Shah, Z.U. Koreshi, S. Siddiq “An analysis and comparison of tube natural frequency modes with fluctuating force frequency from thermal cross-flow fluid in PWR”, international journal of engineering & technology IJET / IJENS vol. 09 Issue 09, ISSN : 2077-1185 (pp 201-205)

[14]  M. Nigar ; A. Feroze; N. Rashid and E. Bryan Coughlin, “Chemical Recycling of Polyethylene Terephthalate (PET) Bottle Waste using DMAP as a Catalyst.”, 242nd ACS National Meeting Aug. 29-Sep 01 Denver, Colorado, USA (2011).

[15] Khalida Inayat Noor and Khalil Ahmad, “Some properties of certain classes of analytic functions related with uniformly convex functions”, International Journal of Physical Sciences, Vol. 6(15), 3812-3820, 2011.

[16]  N., Kousar, S., Liao, “Unsteady non-similarity boundary-layer flows caused by an impulsively stretching flat sheet”. Non-Linear Analysis: Real World Applications. 12 333-342 (2011)

[17]  Muhammad Adil Sadiq, “Steady flow produced by the vibration of a sphere in an infinite viscous incompressible fluid”. Journal of Physical Society of Japan, J. Phys. Soc. Jpn. 80 (2011) 094403.

[18]  S. Z. Ali, M. K. Islam and M. Zafrullah, "Generation of higher degree Chaos by controlling harmonics of the modulating signal in EDFRL", Optik (Elsevier) accepted 20 Nov, 2010 Optik (Elsevier) ISSN: 0030-4026 Darmsdat, Germany Printed online March, 2011

[19] S. Z. Ali, M. K. Islam and M. Zafrullah; “Comparative analysis of Chaotic properties of Optical Chaos Generators”, Published online 27 August 2011 Optik (Elsevier) ISSN: 0030-4026 Germany Printed online Sep, 2011

[20] Siddiqui, M.F., “Factors Determining Migrant Remittances in Pakistan, Interdisciplinary Journal of Contemporary Research in Business, Vol. 2, No. 10, February 2011.

[21] Hameed, I., “Impact of Entrepreneurial Orientation, Entrepreneurial Management and Environmental Dynamism on Firm’s Financial Performance”, Journal of Economics and Behavioral Studies(JEBS), Vol. 3. No. 2, pp. 101-114, Aug. 2011.

[22] Rizwan. Mushtaq and Shahnaz.A Rauf: “Economic Impact of Micro Finance on Borrowers”: Evidence from Punjab, Pakistan (July 28, 2011). Working Paper Series

[23] M. A. Z. Raja, J. A. Khan, and I. M. Qureshi, “Solution of fractional order system of Bagley-Torvik equation using Evolutionary computational intelligence,” Mathematical Problems in Engineering, vol. 2011, Article ID. 765075, 18 pages, 2011, DOI:10.1155/2011/675075. (ISI-Impact factor 0.553)

[24] J. A. Khan, M. A. Z. Raja, and I. M. Qureshi, “Stochastic Computational Approach for Complex Non-linear Ordinary Differential Equations,” Chin. Phys. Lett. vol. 28, no. 2, pp. 020206-09, 2011. DOI: 10.1088/0256-307X/28/2/020206 (ISI-Impact factor 0.972).

[25] M. A. Z. Raja, J. A. Khan, S. I. Ahmad, and I.M. Qureshi, “Numeriacal Treatment of Painleve equation I using neural networks and stochastic solvers”, Book chapter in Contemporary Achievements in Intelligent Systems, Springer book series, 2011

[26] J. A. Khan, M. A. Z. Raja and I.M. Qureshi, “Hybrid Evolutionary Computational Approach: Application to van der Pol Oscillator,” International Journal of the Physical Sciences Vol. 6(31), pp. 7247 - 7261, 30 November, 2011, (ISI-Impact factor 0.54).

[27] J. A. Khan, M. A. Z. Raja, I.M. Qureshi, “An Application of Evolutionary computational Technique to Non-Linear Singular System arising in Polytrophic and Isothermal sphere,” Numerical methods in Engineering Journal, 2011 (in press).

[28] J. A. Khan, M. A. Z.Raja and I.M. Qureshi, “Novel Approach for van der Pol Oscillator on the continuous Time Domain”, Chin. Phys. Lett., Vol.28, no. 11 pp. 110205 (ISI-Impact factor 1.077).

[29] Amir. A. Khaliq, I. M. Qureshi, Jawad. A. Shah, “Temporal Correlation Based Spatial Filtering of Rician Noise for Functional MRI”, Chin. Phys. Lett. Vol. 29, No. 1 (2012) 018701.

[30] J. A. Khan, M. A. Z. Raja, I. M. Qureshi, “Numerical treatment of Nonlinear Emden-Fowler Equation using Stochastic Technique,” Annals of Mathematics and Artificial Intelligence. DOI: 10.1007/s10472-011-9272-8. Online 2nd December 2011, (In Press) (ISI-Impact factor 0.418).

[31] M.M. Tariq, Z. Mehmood, M. Mansoor, M.N Ahmed and M. Pasha "Development of parametric model and warping analysis of composite beam with multiple rigid region, Advanced Materials Research (Volume 326) (online since September 2011) Volume :Advanced Materials for Applied Science and Technology ISSN: 1662-8985 doi:10.4028/www.scientific.net/AMR.326, web site http://www.ttp.net. (Trans Tech Publications, Switzerland)

[32] M N Ahmed and Zahid Mehmood Failure analysis of Multi-cell composite tapered beams under constrained torsion, “Composites: Mechanics, Computations, Applications, An International Journal",

[33] M N Ahmed and Zahid Mehmood, Constrained Torsional analysis of Multi-cell composite tapered beams ONLINE available in Elsevier Journal of Composites Part b

[34] M. A. Z. Raja, J. A. Khan, and I. M. Qureshi, “A new Stochastic Approach for Solution of Riccati Differential Equation of Fractional Order” Ann Math Artif Intell., online available 13-Jan, 2011,vol. 60, No. 3, pp.229-250, 2010, DOI: 10.1007/s10472-010-9222-x. (ISI Impact Factor 0.893)

[35] Liaquat Ali Khan, Muhammad Shahid Khalil, Fathi Mahfouz, “Thermoeconomic Lifecycle Energy Recovery System Optimization for Central Air-Conditioning System Using Evolutionary Technique”, Mehran University Research Journal of Engineering & Technology, Volume 31, No. 1, January, 2012.

[36] Liaquat Ali Khan, Fathi Mahfouz, “Thermo-economic Lifecycle Cost Optimization of an Annular Fin Heat Exchanger”, (Accepted for publication in PJEAS), Jan’2012.

[37] Cheema,A.N. (2011): Upcoming Picture of Aging Population: Pakistan, Quality & Quantity, Accepted.

TECHNICAL PUBLICATIONS (Journal) 2010

[1] M. U. Khan, I. Jan, J. Dai and N. Iqbal, “Control of robot manipulator using automatic loop shaping”, Australian Journal of Basic and Applied Sciences, Vol. 4, no. 7, pp. 2022-2038, 2010.

[2] S. Khushnood, Z. M. Khan, M. A. Malik, Q. Iqbal, S. Bashir, M. Khan, Z. U. Koreshi, M. A. Khan, T. N. Malik and A. H. Qureshi, “Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles”, Nuclear Engineering and Design, 240, Issue 7, pp. 1906-1918, July 2010.

[3] Q. Abbas, M. M. Khan, R. Sabir and Z. U. Koreshi, “Numerical Simulation & Experimental verification of Air Flow Through a heated pipe” International Journal of Mechanical and Mechatronics Engineering, IJMME/IJENS, Vol. 10, No. 2, 7-12. April 2010.

[4] Z. U. Koreshi and S. Siddiq, “Monte Carlo Simulation for radiation transport: collision density in a 1-D slab”, ARPN Journal of Engineering and Applied Sciences, Vol. 5, Issue 3, March 2010.

[5] Masud, J. “Performance Characteristics of Flush Angle-of-Attack Measurement System Integrated on a Pitot Tube” Engineering Applications of Computational Fluid Mechanics Vol. 4, No. 4, pp. 549-557 (2010).

[6] Masud, J. and Akram, F. “Adjustment of Aerodynamic Compensation Characteristics of a Pitot Tube by Rear-Body Shape Manipulation” Journal of Fluids Engineering, Volume 132, Issue 3, pp 034502 (6 pages) doi:10.1115/1.4001156 (2010)

[7] M. A. Malik with Akhtar Khurshid and Abdul Ghafoor, “Effects of Material Properties on Soft Contact Dynamics,” Key Engineering Materials, International Journal, Trans Tech Publications, Switzerland, Vol. 442 (2010), pp. 438 – 444.

[8] M. A. Malik with Imran S. Sarwar, ”Stability analysis and simulation of a two DOF robotic system based on linear control system,” International Journal of Intelligent Systems Technologies and Applications (IJISTA), ISSN (Online): 1740-8873, ISSN (Print): 1740-8865, Vol. 8, Nos. 1 – 4, 2010, pp. 3-17.

[9] M. A. Malik with Imran S. Sarwar and Javaid Iqbal, ”Modeling and motion control of a mechatronics system using BGM with intelligent contrpllers,” International Journal of the Federation of European Simulation Societies, Journal of Simulation: Modeling Practice and Theory, Elsevier Science, ISSN: 1569-190X, Vol. 18, Issue 9, Oct. 2010, pp. 1253 – 1265.

[10] M M Tariq & M.N. Ahmed, “Software Development for Shear Stress Distribution in Multi Cell Beams of Isotropic Materials”. Published in Key Engineering Materials Vol. 442 (2010) pp 453-461¬© (2010) Trans Tech Publications, Switzerland, ISSN:1662-9795.

[11] N. Kousar, S., Liao, “Series Solution of Non-similarity Boundary-layer Flows over a Porous Wedge”. Transport in Porous Media, 83 397-412 (2010)

[12] N., Kousar, S., Liao, “Series solution of non-similarity natural convection boundary-layer flows over permeable vertical surface”. Science in China Series G: Physics, Mechanics & Astronomy, 53 360-368 (2010)

[13] M. Shabir, Y. B. Jun and M. Bano, “On prime fuzzy Bi-ideals of semi groups”, international Journals of fuzzy systems, Vol. 7, No. 3 (2010) pp. 115-128

[14] M. T Shah, M. Bano, “Improving Embedding Capacity with Minimum Degradation of Stego-image”, International Journal of Basic & Applied Sciences IJBAS-IJENS Vol: 10 No. 06 (2010)

[15] Syed Zafar Ali and Muhammad Ahmad Choudhry , "A generalized higher order neural network for aircraft recognition in a video docking system ", Neural Computing & Applications ISSN: 0941-0643 Springer London UK, Feb 2010

[16] Syed Zafar Ali, Muhammad Khawar Islam and Muhammad Zafrullah “Effect of Parametric variation on generation and enhancement of chaos in erbium-doped fiber-ring lasers” Optical Engineering Vol. 49 No.10, October 2010

[17] Rasheed, F., “Human Capitalization and Labour Market Absorption Capacity”, Journal of Business and Economics (Air University).

[18] Shahnaz A R and Haider ,S. “Financial Reforms and Private Savings in Pakistan (1975-2009)” Journal of Business and Economics Vol 2, No 1 2010.

[19] R. H. Hopper, I. Haneef, S. Z. Ali, F. Udrea, and C. H. Oxley, "Use of carbon micro-particles for improved infrared temperature measurement of CMOS MEMS devices," Measurement Science & Technology, vol. 21, 2010.

[20] S. Santra, P. K. Guha, S. Z. Ali, I. Haneef, and F. Udrea, "Silicon on Insulator Diode Temperature Sensor- A Detailed Analysis for Ultra-High Temperature Operation," IEEE Sensors Journal, vol. 10, pp. 997-1003, 2010.

[21] S. Santra, F. Udrea, P. K. Guha, S. Z. Ali, and I. Haneef, "Ultra-high temperature (> 300 degrees C) suspended thermodiode in SOI CMOS technology," Microelectronics Journal, vol. 41, pp. 540-546, 2010.

[22] J. Arif and S. Akhtar, "Discrete-time Lyapunov stable-staggered estimator MIMO adaptive interference cancelation with experimental verification," International Journal of Adaptive Control and Signal Processing, vol. 24, pp. 275-286, Apr 2010.

[23] K. M. Guleren, I. Afgan, and A. Turan, "Predictions of turbulent flow for the impeller of a NASA low-speed centrifugal compressor," Journal of Turbomachinery, vol. 132, pp. 1-8, 2010.

[24] A. Masood, A. Ghafoor, and A. P. Mathur, "Fault coverage of Constrained Random Test Selection for access control: A formal analysis," Journal of Systems and Software, vol. 83, pp. 2607-2617, Dec 2010.

[25] M. Masood, A. Ghafoor, and A. Mathur, "Conformance testing of temporal role-based access control systems," IEEE Transactions on Dependable and Secure Computing, vol. 7, pp. 144-158, 2010.

[26] A. Jalil, T. A. Cheema, A. Manzar, and I.M. Qureshi, “Rotation and Gray-Scale-Invariant Texture Analysis using Radon and Differential Radon Transforms with Hidden Markov Models,” IET Image Processing, Vol.4, ISS.1, pp.42- 48, 2010.

[27] M. A. Z. Raja, J. A. Khan, and I. M. Qureshi, “Evolutionary computational intelligence in solving the Fractional differential Equations,” Lecture notes in Computer Science, vol. 5990, part 1, Springer-Verlog, ACIIDS Hue City, Vietnam pp 231-240, 2010.

[28] M. A. Z. Raja, J. A. Khan, and I. M. Qureshi, “Heuristic computational approach using swarm intelligence in solving fractional differential equations,” GECCO (Companion) 2010: pp. 2023-2026 2010.

[29] M. A. Z. Raja, I. M. Qureshi and J. A. Khan, “Swarm Intelligent optimized neural networks for solving fractional differential equations” IJICIC Vol 7 No. 10 Oct. 2010 ( ISI Impact factor 2.93).

[30] J. A. Khan, M. A. Z. Raja, I.M. Qureshi, “Artificial Neural Network Optimized by Hybrid Computational Intelligence Approach for the Numerical Treatment of the Model of Heart,” African Journal of Biotechnology (ISI-Impact factor 0.556 JCR:2010).

TECHNICAL PUBLICATIONS (Journal) 2009


[1] Z. U. Koreshi, S. Siddiq and T. M. Shah, “Monte Carlo Simulation in Thermal Radiative Transfer: Method Review, Validation and Parameter Sensitivity”, International Journal of Mechanical and Mechatronics Engineering; IJMME/IJENS; Vol. 9, No. 9, October 2009, pp. 221-228. www.ijens.org

[2]
T. M. Shah, Z. U. Koreshi and S. Siddiq, “An analysis and comparison of tube natural frequency with fluctuating force frequency from thermal cross-flow fluid in a PWR”, International Journal of Mechanical and Mechatronics Engineering; Vol. 9, No. 9, October 2009, pp 201-295. www.ijens.org

[3]
Mahwish, B, Shabbir, M and Young, B. J “ On prime Fuzzy Bi-ideals of Semi groups”, (accepted) Iraaian Journal of Fuzzy Systems to be published in 2009.

[4] Abdul M Khan Daniel O. Adams and Malik Nazir. Ahmed, Application of Un constrained Optimization Technique for Designing a Composite Conventional Propeller, NUST Journal, Vol 2 No 1 , 2009, pp 10-16 ISSN 2070-9900.

[5] M. A. Malik, I. Salam, W. Muhammad, and N. Ejaz, “Role of extruded texture on fatigue crack growth in a high strength aluminum alloy thick-walled cylinder,” Journal of Mechanical Science and Technology, KSME, Springer, 23(2009), 2009.pp. 1261-1269

[6] M.A. Malik with Imran S. Sarwar and Javaid Iqbal, “Modeling, Analysis and Motion Control of a Pan Tilt Platform based on linear and nonlinear systems.” Journal: World Scientific and Engineering Academy and Society (WSEAS) Transactions on Systems and Control, Issue 8, Vol. 4, August 2009, ISSN: 1991-8763, pp. 389-398, (ISI/SCI).

[7] M. A. Malik, with S. A. Kayani, “Verifying Experimentfor Automated Design of Mechatronic Systems using Bond Graph Modeling and Simulation and Genetic Programming.” Journal of Information, Intelligence and Knowledge (JIIK), Vol. 1, No. 4, pp. 359-374, 2009. TECHNICAL PUBLICATIONS (Journal) Before and In 2008

TECHNICAL PUBLICATIONS (Journal) Before and In 2008



[1] Liaquat Ali Khan, Ali El-Ghalban, “Heat Exchanger Exergetic Lifecycle Cost Optimization using Evolutionary Algorithms”, WSEAS TRANSACTIONS on HEAT and MASS TRANSFER, Issue 1, Volume 3, January 2008, pp125-136

[2]
Liaquat Ali Khan, Abrar Ahmed, Umar Abdul Ahad and Syed Zahid Hussain “Designand Development of a Robust Control Adjustable Electrical DC Drive System Using PI Controller”, ARPN Journal of Engineering and Applied Sciences, Volume 3, NO. 3, June 2008, pp55-60

[3] Umar Khan, Liaquat Ali Khan and Syed Zahid Hussein “Selection of Optimal Heat Sink Dimensions Using Evolutionary Strategies: A Case Study”, ARPN Journal of Engineering and Applied Sciences, Volume 3, NO. 4, August 2008, pp 1-6

[4]
Liaquat Ali Khan, Abrar Ahmed, Umar Abdul Ahad and Syed Zahid Hussain “Design and Development of a Robust Control Adjustable Electrical DC Drive System Using PI Controller”, ARPN Journal of Engineering and Applied Sciences, Volume 3, NO. 3, June 2008, pp55-60

[5] Umar Khan, Liaquat Ali Khan and Syed Zahid Hussein “Selection of Optimal Heat Sink Dimensions Using Evolutionary Strategies: A Case Study”, ARPN Journal of Engineering and Applied Sciences, Volume 3, NO. 4, August 2008, pp 1-6

[6] Fayyaz A. Afsar, M. Arif, “Detection of ST Segment Deviation Episodes in the ECG using KLT with an Ensemble Neural Classifier”, Physiological Measurements, Vol. 29, pp 747-760, 2008.

[7] Fayyaz A. Afsar, M. Arif, “Robust Electrocardiogram (ECG) beat classification using Discrete Wavelet Transform”, Physiological Measurements, Vol. 29, pp 555-570, 2008.

[8]
M Zubair, M. A. S. Choudhry, A. Naveed, and I. M. Qureshi, “Particle swarm with soft decision for multiuser detection of synchronous multicarrier CDMA,” IEICE Trans. Communication, Vol.E91-B,No.5,pp.-,May. 2008

[9]
Ikramullah Shad “Does Social Support Influence Transfer of Training? Evidence from the Banking Industry in Pakistan” Journal of Pakistan Journal of education, Vol- 25 issue 2, 2008. Page No. 103 – 121, 2008

[10] Dr. Shahnaz A Ruaf; “Evaluation of Monetary and Fiscal Policies in Pakistan” by Tahir Mehmood and Shehnaz A Rauf published in Journal of Political Studies, Issue 14 winter 2008.

[11] Revell, A., Uribe, J, Afgan, I., Jarrin, N., Laurence, D. 2008.” Finite Cylinder Applications and Numerical modeling”. Partners: DESider, UMAN et al. AST3-CT-2003-502842

[12] Filippone, A., Afgan, I. 2008. “Orthogonal blade vortex interaction on a Helicopter tail rotor”. AIAA Journal. Vol. 46, No. 6, pp 1476-89. (DOI: 10.2514/1.32690).

[13] Afgan, I., Moulinec, C., Laurence, D. 2008. “Numerical Simulation of Generic Side Mirror of Car using Large Eddy Simulation with Polyhedral Meshes”. International Journal for Numerical Methods in Fluids. Vol. 57, Issue 8. pp 1107-1113.

[14] Guleren, K. M., Afgan, I., and Turan, A. 2008. “Laminarization of Internal Flows Under the Combined Effect of Strong Curvature and Rotation”. ASME Journal of Fluids Engineering. Volume 130, Issue 9. ID. 091202.

[15] Guleren, K. M., Afgan, I., and Turan, A. 2008. “LES Predictions for the NASA Low-Speed Centrifugal Compressor Impeller”. ASME Journal of Turbomachinery. TURBO-07-1087. In press.

[16] H.M. Khalid and I. Ahmad, “Solar Sterilization of Water”, Renewable Energy, Vol. 12, No.3, pp. 321-324, 1997

[17] M. U. Khan, N. Iqbal and M. A. Kamran, “Image-based Visual Servo Control of PA-10 manipulator” , Mehran Uni. Res. Journal of Science & Technology, Vol. 27, No. 1, pp. 25-36, 2008

[18] S. Khushnood, Z. M. Khan, M. A. Malik, Z. U. Koreshi, M. A. Khan, “A review of heat exchanger tube bundle vibrations in two-phase cross-flow” Nuclear Engineering and Design 23, pp. 233-251, 2004.

[19] Z. U. Koreshi, "Stochastic Simulation of a Nuclear Reaction Driven Chemical and Diffusive Process in a Fusion Reactor Blanket", Progress in Nuclear Energy, 34, No.2, pp.147-170, 1999

[20] Z. U. Koreshi, A. Kinrot and J. D. Lewins, "Neutronic Sensitivity Analysis of the Experimental Test Reactor TIBER-II Blanket Design", Fusion Technology, 22, No.3, pp.371-387, Nov.1992.

[21] Z. U. Koreshi and J. D. Lewins, “Two-group Monte Carlo Perturbation Theory and Applications in Fixed-Source Problems”, Progress in Nuclear Energy, 24, pp.27-38 1990.

[22] Qazi, O. A., Prosser, R., Sheikh, S., R., and Masud, J., “2D Large Eddy Simulation of Turbulent Boundary Flow Around a Controlled-Diffusion Wing Section Using a Locally Refined Unstructured Grid”, NUST Journal of Engineering Sciences, Vol. 1, No. 1, pp.62-70 (2008).

[23] Z. I Baig, A.M Khan & Malik Nazir Ahmed, “Dynamic Behavior of Thin Composite Plates” Published in Technology Forces, Journal of Engineering and Sciences, PAF KIET ,Vol 2, No1 Jan- June 2008, ISSN 1994-862x

[24] J. Loughlan & M N Ahmed, "Multi-Cell Carbon Fibre Composite Box Beams Subjected to Torsion with Variable Twist" Thin-Walled Structures,Volume 46, Issues 7-9, July-September 2008, Pages 914-924 ISSN: 0263-8231

Imprint: ELSEVIER CONFERENCE PROCEEDINGS (International) 2011-2012


[1] M. Tariq, M. Pasha, Dr. M. N. Ahmed, “Development of APDL program for Analysis of Composite Material Multicell Beams”, 12th International Symposium of Advanced Materials, Islamabad, Pakistan September 27, 2011

[2] M. Pasha, “Design of Axially Loaded Helical Spring Isolation Systems”, 12th International Symposium of Advanced Materials, Islamabad, Pakistan September 25, 2011

[3] M. U. Khan, A. Ahmed, A. Azad, I. Jan and N. Iqbal, “Uncalibrated visual servo control with multi-constraint satisfaction”, Proceedings of IEEE, International conference on Robotics and Automation, Shanghai, China, pp. 6318-6323, May 2011

[4] M. A. Malik with Khurram Rehman, Wasim Sarwar and Farhan Zafar, “Investigation of nozzle flow using compressible euler equation,” International Conference on Advanced Software Engineering (ICASE - 2011), Busan, Korea, 26-28 May 2011.

[5] M. A. Malik with Khurram Rehman and M Ajmal, “Advancing front method application for generation of unstructutred meshing on a pre-heater geometry,” International Conference on Advanced Software Engineering (ICASE - 2011), Busan, Korea, 26-28 May 2011.

[6] M. A. Malik with S. Adnan Qasim, Mumtaz Ali Khan and Riaz A. Mufti, “Shear Heating Effects in Modeling High Viscosity Oil Piston Skirts EHL in Idling Speeds Initial Engine Start Up,” 8th Thermal Engineering Joint Conference, USA, 13-17 Mar 2011
[7] M. A. Malik with S. Adnan Qasim,”Modeling Viscous Isothermal Piston Skirts EHL in Very Low Initial Engine Start Up Speeds,” International Joint Tribology Conference, USA, 24-26 Oct 2011.

[8] M. A. Malik with S. Adnan Qasim, Mubashir Gulzar and Riaz A. Mufti, “Modeling Rough Piston Skirts EHL at Very Low Initial Engine Startup Speeds – Pressure Flow Factors Effects,” The IASTED International Conference on Modeling Simulation and Identification, USA, 07-09 Nov 2011

[9] M. A. Malik with A. Khurshid and A. Ghafoor, “Modeling and Analysis of Soft Contact in Robotic Grasping Using Bond Graph Methods,” 2nd International Conference on Manufacturing Science and Engineering, China, 09-11 Apr 2011

[10] M. A. Malik with Khurram Rehman, IJ Khan and Jehangir Hassan, “Design and Optimization of Resistance Wire Electric Heater for Hypersonic Wind Tunnel,” International Meeting of Advances in Thermofluids, Malaysia, 03-04 Oct 2011

[11]
Mehmood, K., and Masud, J. “Analysis of Two-Phase Flow in an Effervescent Atomizer Using Volume of Fluid Method” Paper # AIAA-2012-312 in 50th AIAA Aerospace Sciences Meeting at Nashville, Tennessee, Jan. 9-12, (2012)

[12]
Ishfaq, A., Masud, J., and Nigar, M., “Effect of Free Surface Heat Transfer on Thermocapillary Convection in Floating Zone Liquid Bridge” Paper# AIAA-2011-0445 in 49th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2011)

[13]
Masud, J., and Akram, F., “Effect of Passive Bleed System on an Integrated Diverterless Supersonic Inlet” Paper# AIAA-2011-0920 in 49th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2011)

[14] Ishfaq, A., Masud, J., and Nigar, M., “Effect of Free Surface Heat Transfer on Thermocapillary Convection in Floating Zone Liquid Bridge” Accepted in 49th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2011)

[15]
Tasneem Shah, Rabil Tabassum, “An Efficient Numerical Scheme for Qualification of Thermal Protection System”, International Conference of Advanced Modeling and Simulation 2011

[16] Cheema, A.N., Akhtar, N. (2011): “The Consumption Pattern of Household Food Away From Home: Pakistan. 11th Islamic Countries Conference on Statistical Sciences (ICCS-11)”, 19-22 Dec., Lahore.

[17] Cheema, A.N. (2011): “Impact of use of Mobile Phone during Lecture on Student’s GPA. Recent Advance in Statistics”. ISSOS, 8-9 Feb., Lahore

[18] Waqar Ahmad, Zhang Shengbing, Hafiz Muhammad Amjad, Ghayoor Abbas Gillani and An Jianfeng, “FPGA Based Real Time Implementation Scheme for ARINC 659 Backplane Data Bus”, in the Proc. Of the Third International Conference on Computer Research and Development, 2011, March 11-13, Shanghai, China, pp. 478-482.

[19] Gillani Ghayoor Abbas, Yian Zhu, Amjad Hafiz Muhammad, Ahmad Waqar, Jianfeng An, “Backplane Bus Controller Implementation In FPGA For Hard Real Time Control Systems”, in the Proc. Of the Third International Conference on Communication Software and Networks, 2011, May 27-29, Xi’an, China, pp. 451-456.

[20] Muhammad Habib Mahmood, Muhammad Ali Khalid, Ali Gohar Malhi and Adnan Ali Khan, ‘A Novel Robust Laser Tracking System with Automatic Environment Adaptation and Keystone Correction’, in the Proceedings of the 6th International Conference on Image and Graphics (ICIG), Hefei, P.R.China, pages 743-748, 2011.

[21]
S. Z. Ali, M. K. Islam and M. Zafrullah; “Comparative analysis of Chaotic properties of Optical Chaos Generators”, Published online 27 August 2011 Optik (Elsevier)Germany

[22] Muhammad Yasir and Adnan K Kiani “Optimization between Throughput and Fairness in WiMAX Network” in Eighth IEEE and IFIP International Conference on wireless and Optical communications Networks WOCN 2011 Paris France. Print ISBN: 978-1-4577-0262-4 INSPEC Accession Number: 12048766

[23]
Muhammad Yasir and Ammar J Malik “Body to body network using zigbee” 2011 3rd IEEE International Conference on Communication Software and Networks (ICCSN 2011) Xi'an, China, Print ISBN: 978-1-61284-485-5 INSPEC Accession Number: 12260413

[24] Muhammad Yasir, Ammar J Malik and Kamran Rauf “Quality of service (QoS) in wireless networks " in IEEE 3rd International Conference on Computer and Network Technology (ICCNT) Taiyuan,Shanxi China 2011

[25] Sundas Amin, Beena, Madeeha Uzma and Talal Azfar, “Investigation of Self-Imaging Position Dependence on Relative Modal Phase Shifts in MMI Waveguides”, Proc. Of the Eighth International Conference on High-capacity Optical Networks and Emerging Technologies, HONET-2011, Dec. 19-21, Riyadh, Kingdom of Saudi Arabia. (Has been accepted and presented. Will soon be published in IEEE Xplore).

[26] Beena, Madeeha Uzma, Sundas Amin and Talal Azfar, “Selective Mode Excitation in GaAs Multi-Mode Intereference (MMI) Device using Bragg Grating”, Proc. Of the Eighth International Conference on High-capacity Optical Networks and Emerging Technologies, HONET-2011, Dec. 19-21, Riyadh, Kingdom of Saudi Arabia. (Has been accepted and presented. Will soon be published in IEEE Xplore).

[27]
Sundas Amin and Khurram Aziz, “Multimode Interference (MMI) Devices – A Survey”, Proc. Of the Eighth International Conference on Frontiers of Information Technology, FIT-2010, Dec. 21-23, Islamabad, Pakistan, Article No. 46 in ACM Digital Library.

[28] Maira Islam, Muhammad Raza Fraz, Zulqarnain Zahid, Muhammad Arif, “Optimizing Common Spatial Pattern and Feature Extraction Algorithm for Brain computer Interface”, 2011 7th International Conference on Emerging Technologies (ICET), Sept. 5-6, Islamabad, INSPEC Accession Number: 12317116, ISBN: 978-1-4577-0769-8

[29] Akram Rashid, Zahooruddin, Dr. Ijaz Mansoor Qureshi, Dr. Aamer Saleem,Conference:- “Electrocardiogram signal processing for baseline noise removal using blind source separation techniques: A comparative analysis” International Conference on Machine Learning and Cybernetics ICMLC 10-13 July 2011 Guilin, China. Published in IEEE Catalog No: CFP11523-PRT ISBN: 978-1-4577-0306-5, ISSN: 2160-133X, Volume 4 of 4. Page 1756

[30] Mingyi He, Lin Bai, Syeda Narjis Rizvi, “Hyperspectral Images Compression Algorithm Using Wavelet Transform and Independent Components Analysis,” Satellite Data Compression, Communications, and Processing VI, Proc. SPIE, Vol. 7810, San Diego, California, USA (EI: 20104213296133)

[31] Mingyi He, Huanping Chen, Xu Li, Fatima Syeda Narjis, “Multi-focus Image Fusion by Progressive Pixel Extraction,” 6th IEEE conference on industrial Electronics and Applications(ICIEA), pp:1731-1735, doi:10.1109/ICIEA.2011.5975871

[32] Naveed Ahmed Abbasi, Syeda Narjis Fatima, Fan Yangyu, “Multiple Description based distributive compression for hypers”.

[33] Z. U. Khan, A. Naveed, I.M. Qureshi, Fawad Zaman, “Independent Null Steering by Decoupling complex weights,” IEICE Electronics Express, 2011.

[34] M. A. Z. Raja, J. A. Khan, and I.M. Qureshi, “Swarm Intelligence Optimized neural network for solving Fractional Order Systems of Bagley-Torvik equation” Intelligent engineering systems for Electrical Engineering and Communication, 2011

[36] Choudhry, Muhammad Aamer Saleem, Zubair, I.M. Qureshi, “Multicarrier-assisted PU-PIC detector for overloaded CDMA system” in the Proc. IEEE GCC 2011, Feb, pp. 409-412, Dubai UAE.

[37] Fawad Zaman, I.M. Qureshi, A. Naveed, Z. U. Khan, “Direction of arrival estimation in noisy environment using swarming intelligence and genetic algorithm with single snap-shot,” IEICE Electronics Express, 2011.

[38]
Kiran Sultan and I.M. Qureshi and Muhammad Zubair, “SNR maximization through relay selection in non-regenerative cognitive relay network using artificial bee colony,” IEICE Electronics Express, 2011

CONFERENCE PROCEEDINGS (International) 2010

[1] S. Siddiq, S. Khushnood, Z. U. Koreshi and T. M. Shah, “Solar Thermal Energy Storage using Liquid Ammonia Systems in Industry”, International Conference on Energy Systems Engineering, accepted for publication in IEEE Proceedings, ICESE-2010, Oct. 25-27, 2010, Islamabad, Pakistan

[2] Z. U. Koreshi, S. Siddiq and L. A. Khan, “Feasibility of Small HTGR’s: Energy-Economic Analysis for Developing Countries”, International Conference on Energy Systems Engineering, accepted for publication in IEEE Proceedings, ICESE-2010, Oct. 25-27, 2010, Islamabad, Pakistan

[3] Z. U. Koreshi, S. Siddiq, “Monte Carlo Simulation Compared with Classic Deterministic Solutions for Neutron Transport and Diffusion”, Proc. Of the Eighteenth International Conference on Nuclear Engineering, (ICONE 18-29971), May 17-21, 2010, Xi’an, China

[4] M. A. Malik, S.U. Khalid and F. Barlas,” Modeling and Simulation of kinematics for an active flapping and pitching mechanism.” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1306 - 1311.

[5] M. A. Malik and Sadia Riaz, “Single Seven State Discrete Time Extended Kalman Filter for Micro Air Vehicle ” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1509 - 1514.

[6] M. A. Malik,and Munzer Shahir Qureshi, ”Vibration Analysis of Flapping Wing Micro Air Vehicle using Finite Element Method.” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1140 - 1144.

[7] M. A. Malik,and Farooq Ahmed, ”Effect of Different Design Parameters on Lift, Thrust and Drag of an Ornithopter.” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1460 - 1465.

[8] M. A. Malik, Ali Usman, Syed Adnan Qasimn and Riaz Mufti,”Modeling of Piston Top Ring Lubrication by considering Cylinder Out-of-Roundness in the Initial Engine Start Up.” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1331 - 1336.

[9] M. A. Malik, Syed Adnan Qasim, Mumtaz Ali Khan and Riaz Mufti,”Shear-Heating Effects on Piston Skirts Lubrication in the Initial Engine Start Up.” World World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, pp. 1571 - 1576.

[10] M. A. Malik, Syed Adnan Qasim, Usman Farooq and Riaz Mufti, ”Non-Newtonian Effects on Lubricant Hydrodynamic Thin Film Flows in the Initial Engine Start Up.” World Congress on Engineering (WCE), International Conference in Mechanical Engineering (ICME – 2010), June 30 – July 2, 2010, London, UK, Vol. 2, 1301 - 1305.

[11] M. A. Malik with S. Adnan Qasim, Usman F. Choudhry and Riaz A. Mufti, “Modeling Non-Newtonian Piston Skirts EHL in the Initial Engine Startup,” STLE/ASME International Joint Tribology Conference (IJTC-2010), San Fransisco, USA, October 17-20, 2010.

[12] M. A. Malik with Khurram Rehman, “A Novel Approach to enhance the power and torque output of a Horizontal Axis Wind Turbine at lower wind speeds,” IEEE International Conference on Energy Systems Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan, 25 – 27 October 2010.

[13] M. A. Malik with Ali Usman, Syed Adnan Qasim and Riaz A. Mufti, “Modeling the Energy Loss in the Two-Dimensional Lubrication of the first compression ring in the initial engine start-up,” IEEE International Conference on Energy Systems Engineering, College of Electrical and Mechanical Engineering, National University of Sciences and Technology, Islamabad, Pakistan, 25 – 27 October 2010.

[14] M. A. Malik with Ali Usman, S. Adnan Qasim and Riaz A. Mufti, “Two-Dimensional EHL Fluid Flow Modeling of Piston Top Ring considering Elastic Deformation in Initial Engine Startup,” ASME International Mechanical Engineering Congress & Exposition (IMECE – 2010), IMECE 2010 - 38029, Vancouver, Canada, November 12 – 18, 2010.

[15] M. A. Malik with S. Adnan Qasim, Usman Farooq and Riaz A. Mufti, “Non-Newtonian EHL Fluid Flow Modeling of Piston Skirts considering Low Speed Effects in Initial Engine Startup,” ASME International Mechanical Engineering Congress & Exposition (IMECE – 2010), IMECE 2010 - 38439, Vancouver, Canada, November 12 – 18, 2010.

[16] M. A. Malik with S. Adnan Qasim, Mumtaz Ali Khan and Riaz A. Mufti, “Modeling of Shear Heating in EHL of Piston Skirts by considering Different Viscosity Oils in Initial Engine Startup,” ASME International Mechanical Engineering Congress & Exposition (IMECE – 2010), IMECE 2010 - 38448, Vancouver, Canada, November 12 – 18, 2010.

[17] M. A. Malik with S. Adnan Qasim, Usman Farooq and Riaz A. Mufti, “Non-Newtonian Piston EHL of two different Viscosity Oils in Initial Engine Startup,” Tribology Congress in Australia (ASIATRIB – 2010), AsiaTrib2010 – 1143, Perth, Western Australia, 5 – 9 December 2010.

[18] M. A. Malik with S. Adnan Qasim, Mumtaz Ali Khan and Riaz A. Mufti, “Shearing Heating in Piston Skirts EHL Modeling in High Speed Initial Engine Startup,” Tribology Congress in Australia (ASIATRIB – 2010), AsiaTrib2010 – 1144, Perth, Western Australia, 5 – 9 December 2010.

[19] Jafri, S., Masud, J., and Nigar, M., “Effect of Free Surface Heat Transfer on Oscillatory Thermocapillary Flow in Differentially Heated Cylindrical Annulus” Paper # AIAA-2010-1187 in 48th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2010)

[20] Masud, J., and Akram, F., “Flow Field and Performance Analysis of an Integrated Diverterless Supersonic Inlet” Paper # AIAA-2010-481 in 48th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2010)

[21] Ishfaq, A., Masud, J., Khan, M., and Nigar, M., “Effect of First Vibration Mode on Sub-Critical Thermocapillary Convection in Floating Zone Liquid Bridge” Paper # AIAA-2010-637 in 48th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2010)

[22] Jafri, S., Masud, J., and Nigar, M., “Effect of Free Surface Heat Transfer on Oscillatory Thermocapillary Flow in Differentially Heated Cylindrical Annulus” Paper # AIAA-2010-1187 in 48 th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2010)

[23] Ishfaq, A., Masud, J., Khan, M., and Nigar, M., “Effect of First Vibration Mode on Sub-Critical Thermocapillary Convection in Floating Zone Liquid Bridge” Paper # AIAA-2010-637 in 48th AIAA Aerospace Sciences Meeting at Orlando, Florida, USA (2010)

[24] Cheema, A.N. (2010): “Future Prospects of Aging Population : Pakistan” in 3rd International Conference on Statistical Sciences. Punjab University, 25-27 Nov., Lahore.

[25] Cheema, A.N. (2010): “Some Characteristics and Issues of Aging Population: Pakistan”. in 7th International Conference on World Statistical Day. ISSOS, 21-22 Oct., Lahore

[26] Cheema, A.N., Aslam, M. (2010): “Regression Analysis of Wheat Model”. in 7th International Conference on World Statistical Day. ISSOS, 21-22 Oct., Lahore.

[27] S. Zafar Ali, Muhammad Khawar Islam and Muhammad Zafrullah “Controlling the Degree of Chaos in EDFRL by Adjusting Duty Cycle and Phase of the Modulating Signal” International Conference On Advanced Infocomm Technology 20-23 July 2010 2010 Hainan, China

[28] Farzana Arshad, S. Zafar Ali, Muhammad Khawar Islam and Muhammad Zafrullah, “Effect of Transmission Fiber and Amplifier Noise on Optical Chaos Synchronization” International Conference On Advanced Infocomm Technology 20-23 July 2010 Hainan, China

[29] Kamran Rauf and Muhammad Yasir, “CHAOS BASED OPTICAL COMMUNICATION”, 2010 International Conference on Intelligence and Information Technology, October. 28-30, Lahore, Pakistan. IEEE Catalog Number: CFP1071K-PRT ISBN: 978-1-4244-8138-5

[30] W. Khan, “Increasing Convergence Rate of a Fractionally Spaced Channel Equalizer”, Proc. of International Conference on Communication Science and Engineering, 2010, July 14-16, Bali, Indonesia, pp. 390-393

[31] Alyaei, B., Glass, A., Qureshi, I. M., and Nidal, A., “Line Coded Phase Shift Keying (LCPSK): One Binary One Ternary PSK (1B1TPSK) transmitter analysis and design,” 25th International Technical Conference on Circuits/Systems, Computer and Communications (ITC-CSCC 2010), Ambassador Pattaya, Thailand, July 4-7, 2010.

[32] Mumajjed Ul Mudassir , Adeel Akram, “Performance evaluation of FAST TCP traffic flows in multihomed MANETS”, (The 2010 International Conference on Future Generation Communication and Networking, Dec13-15 2010, ICC Jeju, Korea), Communications in Computer and Information Science, 2010, Volume 120, 450-458, Springer – Verlag Berlin Heidelberg 2010

[33] Akram Rashid, Zahooruddin “Efficient Multicolor multipurpose optical reflex eye mark sensor (EMMEMS)” Published in the 25TH International Conference on CAD/CAD, Robotics and Factories of the Future(CARsFOF), 2010 with the publication ISNB number: 978-0-620-46582-3.

[34] Akram Rashid “Multiuser Detection in DS-CDMA Using Evolutionary Techniques” published in the International Conference on Computer, Electrical and System Sciences and Engineering Volume 3. Paris, France July 28-30 2010.

[35] Choudhry, M.A.S, M. Zubair, and I.M. Qureshi, “Particle swarm optimization based MUD for overloaded MC-CDMA system” in the Proc. IEEE WCNIS 2010, pp. 1-5, Beijing China.

[36] Choudhry, M.A.S, M. Zubair and I.M. Qureshi, “MUD for WCDMA using modified PSO algorithm” in the Proc. IEEE WCSP 2010, p. 1-4, Suzhou China.

CONFERENCE PROCEEDINGS (International) 2009

[1] Nadeem Khan “Determining organizational performance through HCM drivers”, Conference at Sohar University, Oman, on 30 – 31 March 2009.

[2] Shahid Hussain Abbassi, “Algorithm for Topology Discovery in Resilient Packet Ring IEEE802.17”, Proceedings of SETIT 2009, 22-26 March 2009, Hammamet, Tunisia.

[3] Bahman Alyaei, B., “Arctan Spectrum for Baseband Data Transmission” Accepted by the technical program committee of SETIT 2009 5th International Conference: Sciences of Electronic, Technologies of Information and Telecommunications due on March 22-26, 2009 in TUNISIA.
 
[4] Jehanzeb Masud., “Performance Characteristics of Flush Angle -of-Attack Measurement System Integrated on a Pitot Tube” Paper # AIAA-2009-1077 in 47th AIAA Aerospace Sciences Meeting and Exhibit at Orlando, Florida, USA (2009)

[5] Ahmed, S., and Jehanzeb Masud., “Optimization of High Pressure Turbine Performance with Contoured End Wall NGV using Casing Recess and Tip Cle arance Concepts”Paper # AIAA-2009-512 in 47th AIAA Aerospace Sciences Meeting and Exhibit at Orlando, Florida, USA (2009)
 
[6] Masud, J., Afgan, I. Performance Characteristics of Flush Angle -of-Attack Measurement System Integrated on a Pitot Tube. 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. Orlando, Florida, Jan. 5-8, 2009.

[7] M. Arif, Fayyaz A. Afsar, M.U. Akram, and A. Fida, Arif Index for Predicting the Classification Accuracy of Features and its Application in Heart Beat Classification Problem, Advances in Knowledge Discovery and Data Mining, Ed. Thanaruk Theeramunkong, Boonserm Kijsirkul, Tu-Bao Ho, PAKDD2009 Proceedings, LNAI 5476, pp. 491–498, Springer-Verlag Berlin Heidelberg, 2009.

[8] M. Arif and A. Fida, Assessment of Features Quality of Class Discrimination using Arif Index and its Application to Physiological Datasets, pp 203-208, Proceedings of 3rd International Conference on Information and Communication Technologies, 2009.

[9] M. Arif, M.U. Akram, Fayyaz A. Afsar, Arrhythmia Beat Classification using Pruned Fuzzy K-Nearest Neighbor Classifier, Proceedings of International Conference on Soft Computing and Pattern Recognition, SoCPaR, 2009.

[10] Fayyaz A. Afsar, M. S. Riaz and M. Arif, A Comparison of Baseline Removal Algorithms for Electrocardiogram (ECG) based Automated Diagnosis of Coronary Heart Disease, Proceedings of 3rd International Conference on Bioinformatics & Biomedical Engineering (iCBBE-2009), Beijing, PR of China, June 11-13, 2009.

[11] Alyaei, B., “Line Coded Modulation: One Binary One Ternary Phase Shift Keying (1T1BPSK)” 3ed International Conference on Signal Processing and Communication Systems (ICSPCS 2009), September, 28-30, 2009, Omaha, Nebraska, USA.

[12] Aamer Hanif, Ahmad Sajjad, “ICT Based Quality Improvement Initiatives in Small and Medium Enterprises”. Proceedings of the 2009 International Conference on Management Technology and Applications, Beijing, China, August, 2009.

[13] Z. Jalil, Aamer Hanif, “Improving Management of Outsourced Software Projects in Pakistan”. Proceedings of the 2nd IEEE International Conference on Computer Science and Information Technology, Beijing, China, August, 2009.

[14] Aamer Hanif, Irfan Manarvi, “Performance Based Segmentation of Small and Medium Enterprises: A Data Mining Approach”. Proceedings of the 39th International Conference on Computers and Industrial Engineering, Universit√© de Technologie de Troyes, France, July 2009.

[15] J. A. Khan, M. A. Z. Raja, and I.M. Qureshi, "Swarm Intelligence for the Solution of Problems in Differential Equations," icecs, pp.141-147, Second International Conference on Environmental and Computer Science, 2009.

CONFERENCE PROCEEDINGS (International) 2008

[1] Z.U.Koreshi, S.Siddiq, I.A.Khan and M.T.Shah, “Simulation of an XRF Experiment for Gold Assaying with an Interaction Probability and Moments Model”, Proc. of the Sixteenth International Conference on Nuclear Engineering, (ICONE-16-48026), May11-16, 2008, Orlando, Florida, USA

[2] Liaquat Ali Khan, Ali El-Ghalban, “Heat Exchanger Exergoeconomic life cycle cost optimization” 3rd IASME/WSEAS International conference on Energy and Environment, Cambridge, UK, pp. 99-106, 23-25 Feb 2008.

[3] Liaquat Ali Khan, Juwairiyah Naeem, Umar Khan, S. Zahid Hussain, “PID Control of a Biped Robot” 8th WSEAS International conference on Robotics, Control and Manufacturing Technology ROCOM’08, Hangshou, China, pp. 156-160, 6-8 April 2008.

[4] Umar Khan, Liaquat Ali Khan, S. Zahid Hussain, “Reinforcement Learning for Appearance Based Visual Serving in Robotics Manipulators”, Internationa l conference on Robotics, Control and Manufacturing Technology ROCOM’08, Hangshou, China, pp. 160-168, 6-8 April 2008.

[5] Liaquat Ali Khan, Juwairiyah Naeem, Umar Khan, S. Zahid Hussain, “PID Control of a Biped Robot” 8th WSEAS International conference on Robotics, Control and Manufacturing Technology ROCOM’08, Hangshou, China, pp. 156-160, 6-8 April 2008.

[6] Umar Khan, Liaquat Ali Khan, S. Zahid Hussain, “Reinforcement Learning for Appearance Based Visual Serving in Robotics Manipulators”, International conference on Robotics, Control and Manufacturing Technology ROCOM’08, Hangshou, China, pp.160-168, 6-8 April 2008.

[7] Afsar, Fayyaz A., Akram, M. U., Arif, M., Khurshid, J., A pruned fuzzy k-nearest neighbor classifier with application to electrocardiogram based cardiac arrhythmia recognition, Proceedings of IEEE International Multi-topic Conference INMIC, pp. 143 –148, 2008.

[8] Fayyaz A. Afsar, and M. Arif, Robust Classification of ECG Beats using Discrete Wavelet Transform & Principal Component Analysis, Proc. 2nd International Conference on Bioinformatics & Biomedical Engineering (iCBBE-2008), Shanghai, PR of China, May 16-18, 2008

[9] Syed Afaq Hussain Numerical Recognition for Urdu Script in unconstrained environment, in proceedings of the International Conference on Information Technology-3-5 June,09 Jordan VANETs Mobility Model Entities and Its Impact, proceedings of the 4th International Conference on Emerging Technologies, IEEE ICET 2008 (18-19 October 2008), Rawalpindi. IEEE Catalog No: CFP08617 ISBN: 978-1-4244-2211-1

[10] Aamer Hanif, Irfan Manarvi, “Influence of Quality, Innovation and New Product/Services Design on Small and Medium Enterprises”. To appear in proceedings of the 2009 International Conference of Manufacturing Engineering and Engineering Management, London, UK, July 2009.

[11] Z. U. Koreshi, Tasneem. M. Shah, S. Siddiq’ “Multi-channel Analyser Gold sampling in proceedings 16th International Conference on Nuclear Engineering (ICONE), May 11-15, 2008 Orlando, Florida, USA

[12] Sarwar Saeed, Magnus subgroups of one-relator surface groups, accepted for publication in the Journal of Algebra. (Authors: J. Howie and M.S. Saeed)

[13] Sarwar Saeed, Freiheitssatze for one-relator quotients of surface groups and of limit groups, Quart. J. Math. Oxford, 00(2008), 1-13; doi:10.1093/qmath/han015. (Authors: J. Howie and M.S. Saeed)

[14] M. Shabir, M. Shoaib, Characterization of Monoids by the properties of their Intuitionistic Fuzzy Subacts, New Mathematics and Natural Computation, March 6, No, 1 pp 1-18 (2010).

[15] Ikramullah Shad “Influence of Workplace Religiosity on Transfer of Training in Banking Sector” paper accepted for presentation at the meetings of the Association for the Study of Religion, Economics, and Culture (ASREC) held in Arlington, VA, April 3– 5, Washington, D.C

[16] M. W. Pervaz and A. Bhatti, "Is Change Necessary? A Case of MTC Textile”, May, 2009

[17] M.J Javed and A. Bhatti, "Lack of Right to Appeal: Sky Cement Company Limited" ” May, 2009.

[18] G. Murtaza and A. Bhatti, "Employees Turnover: Case of Broadcasting Organization (Radio Voice FM Pvt. Ltd.)" ” May, 2009.

[19] Aftab Bhatti, “A Gender Based Comparison of Job Satisfaction among Banking Sector Employees in Pakistan”, International Conference on Applied Business and Economics, ICABE-2009, March 30-31, Sohar, Sultanate of Oman, pp. 5-19 2009

[20] Ashraf, H., Zufliqar, I & Nailah Riaz (2008a) Identifying gaps between College English and University requirements. Presented at the 25th SPELT International Conference, FJWU, Rawalpindi.

[21] Hina Ashraf, (2008b) Schooling and religious education: Issues and challenges. National seminar arranged by Itehad-ul-Madaris for teachers of madrassahs, Best Western, Islamabad.

[22] Mughal. U. N., and Jehanzeb Masud., “Use of Conformal Mapping Technique to Theoretically Visualize the Flow Around an Airfoil Generated From a Lifting Cylinder in Uniform Flow for Flush Port Air Data System”, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, South Korea,18-21 August 2008.

[23] Jehanzeb Masud., Qazi, O. A., Sheikh, S, Pervez, K., and Akram, F“Adjustment of Aerodynamic Compensation Characteristics of a Pitot Tube by Rear-Body Shape Manipulation” Paper # AIAA-2008-0254, 46th AIAA Aerospace Sciences Meeting and Exhibit at Reno, Nevada, USA (2008)

[24] Shazia Akhtar, S. & Mehmood, Z. (2008).The Relationship of Upward Influence Tactics with Age, Gender and Industry: An Analysis of Asian Perspective. Proceedings of the 4th National Human Resource Management Conference, Negeri Sembilan, Malaysia, Aug 2008

[25] Shazia Akhtar, S., Mehmood, Z. & Madi, M. (2008) .The Relationship of Upward Influence Tactics with Age, Gender and Industry: An Empirical Analysis of Asian Perspective. Proceedings of the 1st International Conference of the South Asian Chapter of AGBA, Muree, Pakistan, Nov 2008.

CONFERENCE PROCEEDINGS (National) 2011-2012

[1] M. T. Shah, Zia Uddin, Image based steganography using 1 LSB to 4 LSB text embedding in Computer Forensics Steganalysis. National Conference SZABIST, June 2011 CONFERENCE PROCEEDINGS (National) 2009

CONFERENCE PROCEEDINGS (National) 2009


[1] M. U. Khan, N. Iqbal and I. Jan, Vision based system for camera tracking in eye-in-hand configuration, Proceedings of FIT, Pakistan, 2009

[2] I. Jan, M. U. Khan and N. Iqbal, “Combined application of Kalman filtering and correlation towards autonomous helicopter landing”, Proceedings of IEEE 2nd Int. Conf. Computer, Control and Communication, Karachi, Pakistan, pp. 1-6, 2009

[3] Ahmed. E., and Masud. J., “Effect of Fuel Injection Swirl on Atomization and Species Concentration in a Gas Turbine Combustor”, 6th International Bhurban Conference on Applied Sciences and Technology, Pakistan (2009).

[4] Faisal. M., and Masud. J., “Computational Study of Effects of Solidity and Tip Clearance on the Efficiency, Performance and Flow Field of a Two Stage Low Pressure Turbine”, 6th International Bhurban Conference on Applied Sciences and Technology, Pakistan (2009).

[5] Ahmed. S., and Masud. J., “Coputational Study of Effects of Blade Contour and Tip Clearance on the Efficiency, Performance and Flow Field of a Low Pressure Turbine Stage”, 6th International Bhurban Conference on Applied Sciences and Technology, Pakistan (2009)
 
[6] Masud, J., and Imran, M., “Effect of Turbulence Modeling on Computation of Internal Flows Involving Ejector Phenomenon”, Keynote address at 1st International Conference on Aerospace Science and Engineering (ICASE 2009), Islamabad, Pakistan, 18-20August 2009.

[7] Afgan, I., Guleren, K. M. Industrial Application of Large Eddy Simulations. Invited speaker for 6th International Bhurban Conference on Applied Sciences & Technology (IBCAST). Islamabad, Pakistan. Jan 19-22, 2009.

[8] Afgan, I., Guleren, K. M., Riaz, R., Laurence, D. Investigation of Flow and Acoustic Analysis over a Generic Side Mirror. 6th International Bhurban Conference on Applied Sciences & Technology (IBCAST). Islamabad, Pakistan. Jan 19-22, 2009.

[9] Zaffar. M. Khan, M Nigar and Zia Mahmood “Analysis of Failure Modes of Carbon-Fiber Reinforced Epoxy Composites”, 6th International Bhurban Conference on Applied Sciences and Technology, Islamabad, Pakistan, ISSN # 969-8741-03-08, Januaray 2009.


CONFERENCE PROCEEDINGS (National) 2008

[1] S. Siddiq, Z. U. Koreshi, T. M. Shah, “Mathematical modeling of Multi-channel Analyser: Gold sampling using Moments Methods”, Proceedings of Symposium on Computational Complexities Innovations & Solutions, May 12-13, 2008.

[2] T. M. Shah, I. A. Khan, Z. U. Koreshi, “An Analysis and Comparison of Tube Natural Frequency from Thermal Cross-Fluid Flow in a PWR reactor (300 MWe)”, In proceeding, Symposium on Computational Complexities Innovations & Solutions, May 12-13, 2008.

[3] I. Ahmed, “Renewable Energy Prospects for Pakistan in a Sustainable Context”, Renewable Energy Prospects in union Council Bhattian, Tehsil Kotli Sattian, District Rawalpindi, for Sustainable Development Prepared for PIDE, Quaid-i-Azam University, August, 2008.

[4] Masud, J., “Design Methodologies for Accurate Air Data Measurement in Aerospace Applications”, Keynote address at 2nd International Conference on Advances in Space Technology (ICAST 2008), Islamabad, Pakistan, 29-30 November 2008.

[5] S. Siddiq, Z. U. Koreshi, T. M. Shah, “Moments Method For Depth Profiling In XRF Elemental Analysis”, 3rd International Symposium on Computational Complexities, Abbotabad, Pakistan 2008

[6] M. U. Khan and N. Iqbal, Control of Robot Arm PA-10 using Camera Vision, Proceedings of IBCAST, Pakistan, pp. 97-103, Jan. 2007